CPP films can be produced with a maximum width of 2550 millimeter and their thickness is in the range of 20 to 70 micron. For other food and medical products, there is no thickness limits and the maximum width for press products are 1200 millimeters.

It depends on the customer’s instructions but its diameter is usually in the range of 700 to 800 millimeters and its weight is different relative to the width.

If keeping conditions are convenient, temperature is in the 5 to 35  range and products are kept away from direct sunlight, the minimum usable time is 1 year.

The appropriate packaging is examined based on the customer’s requirement, equipment and the market needs. In PMA, tough thermoforming and pillow packing is used.

It’s usually 14 days after the final design is confirmed but if the wreckage of the intended cylinder is available, production time can be reduced to a week.

Yes. All of the company products have health certificates from the respective institutions, such as Bureau of standard and Department of medical devices.

As each product has its own specific grammage, the number in per kilo is different for each product, but it can be figured and informed through company selling experts.

The following physical, chemical and microbiological tests are conducted in the PMA co. laboratories:

• OTR, WVTR, tension test, friction factor test, sealable strength test, sealable, impact test, thickness control and various microbial cultures such as OSA, YGC and PCA.